Home » Mold Guide

Mold Guide

Seven measures to reduce mold processing defects

2021-11-04 Mold Encyclopedia Comments Off on Seven measures to reduce mold processing defects

1. Reasonably select and dress the grinding wheel. The grinding wheel of white corundum is better. Its performance is hard and brittle, and it is easy to produce new cutting edges. Therefore, the cutt...

Precautions for stamping die installation

2021-10-21 Mold Encyclopedia Comments Off on Precautions for stamping die installation

General precautions for mold installation—check the punching device on the press and temporarily adjust it to the highest position so as not to be bent when adjusting the closing height of the press; ...

Introduction of Plastic Die Casting Process

2021-10-21 Mold Encyclopedia Comments Off on Introduction of Plastic Die Casting Process

In the die-casting process, the thermosetting resin material is added to a separate material cavity, often called a material tank, and then forced into one or more closed molds for polymerization (cur...

Drilling of high manganese steel ZGMn13

2021-10-21 Mold Encyclopedia Comments Off on Drilling of high manganese steel ZGMn13

As a typical difficult-to-machine material, high manganese steel ZGMn13 is widely used in parts subject to greater impact due to its excellent wear resistance and low price. This article introduces th...

Aspects of the use of die steel

2021-10-21 Mold Encyclopedia Comments Off on Aspects of the use of die steel

When processing molds, because molds have a wide range of uses and the working conditions of various molds are very different, there is a wide range of materials for manufacturing molds, and mold stee...