Home » Processing Type

Processing Type

1. Roughing

The rough machining strategy needs to be determined according to the type of blank and the mold surface. If the blank is a forging or a steel part, it is best to select the area removal model for rough machining, remove most of the blank margin, and obtain a uniform blank margin, which provides convenience for subsequent processing.

2. Semi-Finishing

The main purpose of semi-finishing machining is to ensure uniform margin during finishing. The most common method is to first calculate the boundary contour of the residual material (refer to the three-dimensional contour of the unprocessed area of the tool), and then select a smaller tool to process these three-dimensional contour areas , Without having to rework the entire model.

3. Local Finishing

Local finishing generally refers to clear corner processing. Clear corner processing should use multiple processing or a series of cutting tools from large to small processing method.

4. Finishing

In finishing, it is best to choose parallel finishing unless the height of the mould surface changes greatly.

Link to this article:Processing Type

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^