Home » Stamping Guide » Stretching oil selection

Stretching oil selection

Posted by: Fymicohuang 2021-09-22 Comments Off on Stretching oil selection

  • (1) Since silicon steel plate is a material that is relatively easy to stretch, low-viscosity stamping oil will be used on the premise of preventing scratches for the easy cleaning of the finished workpiece.
  • (2) When selecting drawing oil for carbon steel plates, the best viscosity should be determined according to the process difficulty and degreasing conditions.
  • (3) Because of the chemical reaction with chlorine-based additives, when choosing drawing oil for galvanized steel sheets, attention should be paid to the problem of white rust that may occur with chlorine-type drawing oil, and the use of sulfur-type drawing oil can avoid the problem of rust.
  • (4) Stainless steel is a material that is prone to hardening, and it is required to use drawing oil with high oil film strength and good sintering resistance. Generally use sulfur-chlorine compound

    The stretching oil of the combined type additive can avoid problems such as burrs and cracks on the workpiece while ensuring the extreme pressure performance.

Link to this article:Stretching oil selection

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^