Home » Stamping Guide » What are the advantages of stamping parts

What are the advantages of stamping parts

Posted by: Yoyokuo 2021-09-22 Comments Off on What are the advantages of stamping parts

  • (1) stamping parts manufacturers have high production efficiency in stamping processing, and they are easy to operate and easy to realize mechanization and automation. This is because stamping relies on punching dies and stamping equipment to complete the processing. The number of strokes of ordinary presses can reach dozens of times per minute. The high-speed pressure of stamping parts manufacturers can reach hundreds or even more than a thousand times per minute, and It is possible to get a punched part in one punching stroke.
  • (2) When stamping parts manufacturers are stamping, because the mold guarantees the size and shape accuracy of the stamping parts, and generally does not damage the surface quality of the stamping parts, and the life of the mold is generally longer, the quality of the stamping is stable and the interchangeability is good. It has the characteristics of “just the same”.
  • (3) Stamping parts manufacturers can process parts with a large size range and more complex shapes, such as stopwatches as small as clocks and clocks, as large as automobile longitudinal beams, covering parts, etc., plus the cold deformation and hardening effect of the materials during stamping. The punching strength and rigidity are both high.
  • (4) Stamping parts manufacturers generally do not produce chips or scraps, consume less material, and do not need other heating equipment. Therefore, stamping parts manufacturers are a material-saving and energy-saving processing method, and the cost of stamping parts is lower. .

Link to this article:What are the advantages of stamping parts

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^