2021-08-01 Material Guide Comments Off on Summary of the reasons for the collision at the cnc machining center
When doing cnc machining of workpieces, it often encounters the problem of machining center collision. This will not only affect the processing efficiency, but may even destroy the workpiece, which ma...
2021-08-01 Material Guide Comments Off on Cnc machining spindle speed function character detailed
The spindle speed function word of the cnc processing equipment is used to specify the spindle speed in units of r/min. The address character is S, such as S100, which means the speed of 100. There ar...
2021-08-01 Material Guide Comments Off on Cutting principle selection principle for CNC machining
When programming cnc machining, the programmer must determine the amount of cutting for each process, including spindle speed, back-feeding amount, feed rate, etc., and enter it into the program in th...
2021-07-31 Material Guide Comments Off on How to choose cnc machining cutting amount?
Before the cnc machining parts are processed, the cnc machining center equipment will be programmed. The selection of the cutting amount is very key, because this will directly determine the important...
2021-07-31 Material Guide Comments Off on What CNC cutters do you need to know in CNC machining?
CNC milling cutters are commonly used CNC tools. Also known as the flat knife. Generally used is the white steel knife. Mainly cut some products that are not demanding on the surface. The price is qui...
2021-07-31 Material Guide Comments Off on What is the tool offset in CNC machining?
Using the end mill to machine the workpiece on the cnc machine tool, it can be clearly seen that the tool center motion trajectory does not coincide with the workpiece contour. This is because the cnc...
2021-07-31 Material Guide Comments Off on Basic conditions for CNC machining center maintenance personnel
The repair work of the cnc machining center depends on the personnel conditions. It is necessary for CNC equipment repair operators to have the following basic conditions in order to go further on the...
2021-07-31 Material Guide Comments Off on What is the positioning accuracy of CNC machining center?
The positioning accuracy of the cnc machining center refers to the positional accuracy that can be achieved by the movement of the cnc machine axes under the control of the numerical control device. T...
2021-07-30 Material Guide Comments Off on Application of CNC Machining Technology in Processing of Aluminum Alloy Products
The cnc machining compounding technology refers to a series of processing that requires several cnc processing equipments at the same time, and a series of processing of a cnc processing composite fun...
2021-07-30 Material Guide Comments Off on What should you pay attention to when processing precision metal parts?
1. Check whether the moving part is filled with lubricating oil before mechanical work, then start and check whether the clutch and brake are normal, and run the machine for 1-3 minutes. It is strictl...
2021-07-30 Material Guide Comments Off on What are the safety rules for CNC machining centers?
1. The operation center safety regulations must be observed.2, before work, should wear protective equipment, tie the cuffs, not allowed to wear scarves, gloves, tie, apron, women workers should be in...
2021-07-30 Material Guide Comments Off on Basic characteristics of mold processing
1. High processing precision requirements A pair of molds are generally composed of a concave mold, a punch mold and a mold base, and some may also be a multi-piece split module. Therefore, the combin...
2021-07-29 Material Guide Comments Off on What principles should be followed in the arrangement of the CNC machining center?
The order of the processing sequence should be considered according to the structure of the part and the condition of the blank, as well as the need for positioning and clamping. The key point is that...
2021-07-29 Material Guide Comments Off on Lathe processing materials and processes
he materials commonly used for lathe processing are steel for easy cutting and copper, and the steel for easy cutting contains sulfur-rich S and phosphorus-containing P. The sulfur and manganese are p...
2021-07-29 Material Guide Comments Off on Clamping process method for five-axis linkage machining of cast iron workpiece
When processing cast iron parts, we first need to use high hardness tools to process. Secondly, consider the clamping method. You can consider using a disk to hold the cast iron and then process it. F...
2021-07-29 Material Guide Comments Off on Looking at the professional five-axis linkage processing plant, we have to look at those details.
When inspecting the professional five-axis linkage processing factory, we must first look at the equipment is not advanced enough, what kind of precision effect can be achieved during processing, and ...
2021-07-28 Material Guide Comments Off on Large five-axis linkage processing car wheel technology
When the large five-axis linkage machining of the automobile hub, the two rotating shafts can be well processed, and the machining according to the structure of the hub is analyzed. If the structure a...
2021-07-28 Material Guide Comments Off on What are the characteristics and skills of five-axis linkage processing of stainless steel products?
In the five-axis linkage machining of stainless steel products, we must first face the vibration during machine tool processing. Because the hardness of stainless steel products is high, the resistanc...
2021-07-28 Material Guide Comments Off on How to realize the rapid and efficient production of five-axis linkage processing hand model
The hand model is made according to the high precision standard of the processing industry, so it is necessary to achieve high quality in terms of quality, but how to realize the rapid and efficient p...
2021-07-27 Material Guide Comments Off on Five-axis linkage processing skills for auto parts
Because the structure of the auto parts is relatively complicated and the precision is high, and there are many assembly positions, we first select good materials for processing, because the auto part...
