When processing cast iron parts, we first need to use high hardness tools to process. Secondly, consider the clamping method. You can consider using a disk to hold the cast iron and then process it. Firstly, the disk on the five-axis machine tool will not interfere with the rotation of the five-axis machine tool. There is no need to worry about the obstacle when the tool will hit the clamping during machining. Then the cast iron can be adsorbed on the disk very stable, just consider The machining depth then places four pieces of iron that are lower than the machining depth next to the cast iron to prevent the workpiece from moving against the cast iron.
Pay more attention to whether the machine tool is running normally during machining. If you hear the sound during processing is not correct or the machine tool is difficult to stop, check the tool and program for problems. The program feed and the amount of the knife should be given the appropriate value. When processing the precision of the hole, pay attention to the processing with a new knife. When the workpiece is finished, the finish should be done. When roughing, try to give the amount of knife to be reasonable. Do not cause the machine to vibrate too much during processing. Because the specificity of the five-axis machining may directly affect the normal machining of the machine and the accuracy and stability of the machine tool, it can be as far as possible. Go slowly and eat a little bit to process it to ensure normal operation of the five-axis machine.
Lemo has over 40 cnc machining centers, include 3 axis,4 axis , 5 axis.We are expert on Custom metal parts, CNC machined parts, precision machining, aluminum machining, CNC machining ,CNC milling, CNC turning processing, precision grinding and so on.
pls conttact us as below :Amy ChenDongguan Lemo Precision Metal Products Co.,LtdDirect Phone: 86-137 1326 2409
Skype: amyptjEmail: [email protected]:www.ptjmachining.com
Previous: Lathe processing materials and processesNext: Looking at the professional five-axis linkage processing plant, we have to look at those details.
Link to this article：Clamping process method for five-axis linkage machining of cast iron workpiece
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki，Thanks！^^