Stamping parts are formed by applying external force to plates, strips, pipes and profiles by presses and molds to produce plastic deformation or separation, so as to obtain workpieces (stamping parts...
During processing, it is normal for the problem to occur, but it will be resolved in time, but sometimes, some failures will not be found, so it will be found during later use. So many users are choos...
Fully automated production of mask body machine, including feeding, plastic strip aluminum strip insertion/shortening, scene selection, ultrasonic fusion, slicing, etc. The entire process is automated...
The so-called high-strength bolts mainly refer to a type of bolt fastener products that use high-strength steel as the raw material and require a certain pretension in use. 1. Selection of raw materia...
CNC precision parts processing is still relatively extensive in the industry. Why do you say this? In fact, we can see it in life. It has an obvious effect, and it will be more applied to some mechani...
1. The adopted advanced servo and constant temperature control system is controlled by PLC program so that the material enters → forming → welding → punching is completed at one time, and the entire p...
(4) Finishing process of knife edge part:This part is the key, and the requirements are strict, because the geometry of this part cannot be processed in place by the winding program, and the four-axis...
There are often several surfaces to be processed on a CNC machined part. These surfaces not only have certain accuracy requirements themselves, but also have certain position requirements between the ...
Tempering of fasteners refers to the purpose of reducing the brittleness of steel parts. The quenched steel parts are kept at an appropriate temperature higher than room temperature and lower than 710...
3 Application of processing strategiesFirst, the system automatically creates a rotary blank (turning blank), as shown in the following figure. Note:You can also make radial and Z-direction allowances...
cnc machining of mechanical parts, due to various structural shapes, is composed of flat surfaces, outer cylindrical surfaces, inner cylindrical surfaces or curved surfaces, and forming surfaces. ...
Now more and more customers use Cimatron to process the welding tooth mold on the mask machine. Because the software is powerful, the programming is simple and easy to use, and the generated tool path...
1. In fact, the flange nut is basically the same size as the thread specification compared to the ordinary hexagon nut, but the gasket and nut of the flange nut are integrated, and there are anti-skid...
(1) Guaranteeing cnc machining processing qualityDuring rough machining of CNC machined parts, the metal layer cut out is thicker, the cutting force and tightening force are larger, and the cutting te...
I believe that friends in the industry will not be unfamiliar with the five-axis machining center. The five-axis machining center has a total of five motion coordinate axes, which are two motion ...
Sheet Metal Fabrication is an industrial term that refers to the manipulation of raw materials (such as steel) to make machines and structures. Steel and other metals are cut and shaped during the fab...
Fastener heat treatment process is a very important process in fastener production. For medium carbon steel and low alloy steel products, in order to achieve the strength required for use, they are he...
Having been in the machining industry for many years, I have encountered many customers consulting the same problem. Asked whether there is a definite influence on the accuracy of mechanical parts dur...
Computerized Numerical Control (CNC) Machining is a method used to perform a wide range of manufacturing tasks, which are all carried out by computerized devices. With the help of Computer Aided Desig...
One. Fasteners can be divided into 12 categories So since it is called the capital of fasteners, it must be a place with a complete range of fastener production. From our Jiushuo fastener production a...