In the machining industry, the most common machining methods are turning and milling parts, so when choosing, many people will choose the two to suit themselves, but here to remind everyone, when we are choosing It is certain that the difference between the two is different. What are the advantages of the two and which one is more suitable for oneself. Let's take a look at the difference between rough cutting and fine cutting.
Precision machining After the workpiece has undergone rough cutting, the entire workpiece is actually very close to the appearance and size required by the workpiece itself, but at this time there is still a small margin on the surface of the workpiece for fine cutting, and the surface of the workpiece after finishing cutting is more Clean and the size will be more accurate. Normally, the workpiece can achieve the desired appearance and size of the workpiece after one rough cut and one fine cut. However, not all workpieces are cut once, and some parts of some workpieces may need to be roughed several times. At the same time, there are some workpieces whose accuracy requirements are not too high or the amount of cutting is small. It is also possible to achieve the requirements of the workpiece only after one fine cutting.Precision machining Because the workpiece requires a large amount of cutting, the rough cutting requires a larger cutting force than the finishing cutting. This requires the machine, the tool, and the workpiece to be matched, and the rough cutting is possible to quickly remove the allowance, and the effect is The surface properties afterwards should not be too rough. Fine cutting is the surface performance of the workpiece, and the dimensional accuracy meets the requirements of the workpiece. Therefore, the tools required for fine cutting also need to be very sharp. Because the cutting amount is small, the measurement precision is very high.
Lemo has over 40 cnc machining centers, include 3 axis,4 axis , 5 axis.We are expert on Custom metal parts, CNC machined parts, precision machining, aluminum machining, CNC machining ,CNC milling, CNC turning processing, precision grinding and so on.
pls conttact us as below :Amy ChenDongguan Lemo Precision Metal Products Co.,LtdDirect Phone: 86-137 1326 2409
Skype: amyptjEmail: [email protected]:www.ptjmachining.com
Previous: What are the factors to consider when choosing a CNC system?Next: CNC milling machine and its accessories selection method
Link to this article：What is the difference between rough cutting and fine cutting?
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki，Thanks！^^