Seven common problems in spraying plastic products: appearance: cause of granulation: the working site is not clean, dust mixed into the paint; paint and curing agent have occurred copolymer particles after the paint has been distributed for a long time; the amount of oil from the spray gun is too small and the air pressure is too high, so that the paint atomization is not good or the spray gun is too close to the object surface.
Clean the spray booth and cover the paint barrel; the paint is well distributed and not suitable for long time; apintejinust the spray gun to make it in working condition. Causes of vertical flow: excessive diluent makes the viscosity of paint too low and lose viscosity; too much oil output, too close to the surface or too slow spray operation.
Each time the fuel injection quantity is too much and too thick or the time interval between re spraying is too short; the object surface is uneven, especially the streamline body shape is easy to vertical flow. The treatment method: according to the request proportion; control the oil output to ensure the spraying distance from the spray gun to improve the running speed of the spray gun; each injection should not be too thick, and the interval spraying time should be controlled twice.
Control the amount of oil, reduce the thickness of the paint film; clarify the proportion according to the application: orange peel reason: too much curing agent makes the paint film monotonous and too fast, and the reaction is fierce; the spraying pressure is too high, and the paint film can not be leveled; the temperature on the work site is too high, so the paint film should be violent. Methods: clarify the proportion according to the application; apintejinust the air pressure, not too big.
About PTJMould Industrial Company Limited
PTJmould is a China mold maker of plastic molds- injection mold, die casting moulds, plastic blow molding, rotational molding, medical plastic injection molding, two shot plastic injection molding, insert molding, overmolding, metal injection molding, micro injection molding, powder injection molding, ceramic injection molding, liquid injection molding, husky injection molding, household mold, casting mold, die mold tool, custom molds, china moulds, rapid prototyping tooling, plastic prototyping tooling, punch press tooling, die and tooling for mobile/ cell phone parts, automotive parts, vacuum cleaners, rechargeable tools, telephones, copiers, computers, multimedia speakers, and many other electronic products and household appliances. And also a plastic product manufacturer, mold manufacturer China– plastic parts, plastic water tank, plastic balls, plastic containers, plastic buckle, plastic anchor, plastic hanger, plastic spoon, plastic pipe fitting, plastic tumble, plastic tableware, plastic cups, plastic bottles, plastic tray, plastic cosmetic container, plastic case, plastic food container, plastic chairs, plastic caps, plastic cap closure, plastic tubes, plastic water pipes, plastic knobs, plastic tubing, plastic utility boxes, plastic racks and so on.
Link to this article：Common problems in spray processing of plastic products
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki，Thanks！^^