cnc machining machine combines the rapidity of modern control technology with the precision of cnc CNC machining machine movement to form a real high-speed machining system. The control system of CNC machining machine may shorten the machining cycle and improve the complex 3D model. Obstacles to the finish of aerospace parts or medical device components. When the processor can't keep up with the program running speed, the drive will reduce the feed rate of the tool due to the urgent need of information, thus prolonging the machining cycle and causing the tool to work inconsistently. In order to replace the worn and overloaded tools, in addition to increasing the number of times the tool is moved to the tool magazine, it also affects the effective use of the spindle, increasing the workload and finishing time of the fitter.When the speed (feed rate) is unstable, some problems arise. When the tool is run through the part, its unbalanced motion will cause different loads on the cutting groove on the tool, which will affect the machining accuracy and surface finish. If the tool is not running fast enough to maintain the minimum cutting load of the tool and friction occurs between the tool and the workpiece instead of cutting, the unstable motion of the tool will shorten the life of the tool. This mode of operation also causes a small amount of breakage in the blade, which causes the tool to heat up and become dull. However, with high-speed machining, the average machining speed of the tool through the workpiece will be more uniform, and the machining accuracy will be higher, which not only shortens the machining time, but also prolongs the service life of the tool.
Lemo has over 40 CNC machining centers, include 3 axis,4 axis , 5 axis.We are expert on Custom metal parts, CNC machined parts, precision machining, aluminum machining, CNC machining ,CNC milling, CNC turning processing, precision grinding and so on.
pls conttact us as below :Amy ChenDongguan Lemo Precision Metal Products Co.,LtdDirect Phone: 86-137 1326 2409
Skype: amyptjEmail: [email protected]: www.ptjmachining.com
Previous: The difference between CNC machining center, high speed milling and engraving machine functionsNext: How to use the damping device of CNC machining center?
Link to this article：Analysis of modern control technology of cnc CNC machine tools
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki，Thanks！^^