2021-12-08 Sponsored Content Comments Off on Improvement of pretreatment process for aluminum and aluminum alloy electroplating
I. Introduction Electroplating of various metals on the surface of aluminum and aluminum alloys can significantly improve the physical or chemical properties of the surface. When aluminum and aluminum...
2021-12-08 Sponsored Content Comments Off on Why does stainless steel rust?
People often think that magnets absorb stainless steel materials to verify their quality and authenticity. They are not attractive and non-magnetic. They are considered to be good and genuine; if they...
2021-12-08 Sponsored Content Comments Off on Precautions for installation of twin screw extruder
The twin-screw extruder must be operated according to the operating process: First of all, the acceptance of the equipment out of the box is the first step for the acceptance of the twin-screw extrude...
2021-12-08 Sponsored Content Comments Off on Process method for preventing deformation of aluminum alloy workpiece
The reasons for the processing deformation of aluminum alloy parts and the conventional process methods, the process route is improved according to the material characteristics and part characteristic...
2021-12-08 Sponsored Content Comments Off on Non-ferrous metal waste gas treatment plan
During the production and processing of a metal surface treatment company, there are several processes that produce organic waste gas. These organic waste gas needs to be treated before they can be di...
2021-12-07 Sponsored Content Comments Off on Solution to the wear problem of the open bearing rubber mixer
The open-bearing rubber mixing machine is mainly composed of rollers, frames, glands, pitch adjustment devices, safety devices, motors and transmission devices, braking devices, lubrication systems, c...
2021-12-07 Sponsored Content Comments Off on The Processing Method Of Oil Screen
The main function of the oil screen is to prevent sand. Due to the geology of the oil well where the oil is extracted, the steel grades and types of pipes used in different sand layers are different. ...
2021-12-07 Sponsored Content Comments Off on How to choose a suitable cooling stack for plates?
Through water, air and cooling rollers, the extruded plastic can be cooled in many ways. Quench roll cooling is the easiest cooling calculation to define, but I still see a lot of ambiguity when choos...
2021-12-07 Sponsored Content Comments Off on Explain in detail the safety operating procedures of blow molding machine
1. Before starting the machine, carefully check the power supply, control system and cooling system of the blow molding machine to see if it is normal, add lubricating oil as required, press the (rota...
2021-12-07 Sponsored Content Comments Off on The Characteristics Of Aluminum-Magnesium Alloy Welding
Aluminum-magnesium alloy has high mechanical properties, corrosion resistance, low temperature resistance, good plasticity, light weight and low price, so it is widely used in low temperature pipeline...
2021-12-07 Sponsored Content Comments Off on Characteristics of insert injection molding technology
Insert molding (molding) refers to a molding method in which a pre-prepared insert of dissimilar materials is put into a mold and then resin is injected, and the molten material is joined and solidifi...
2021-12-07 Sponsored Content Comments Off on The Intelligent and Ecological Of Cnc Machining
Machining is a process of using the corresponding technology and equipment to transform the geometric parameters or performance of the workpiece to provide the necessary components for social producti...
2021-12-07 Sponsored Content Comments Off on 3D printer printing warped edge solution
Many users of FDM 3D printers are worried about whether there is a way to solve the problem of curling during the ABS printing process. With this question in mind, the author will share with you some ...
2021-12-07 Sponsored Content Comments Off on What Are The Selection Criteria For Aluminum Pretreatment Chemicals?
The pre-treatment of aluminum usually includes the removal of surface grease and anti-corrosion treatment. However, certain standards are still required for the selection of aluminum treatment agents,...
2021-12-07 Sponsored Content Comments Off on Plastic blister machine plus automatic industrial robot to reduce the labor plan of plastic production
China is known as the “world factory”. With the continuous development of the economy, China’s manufacturing industry will be in a stage of transformation and upgrading. More compani...
2021-12-06 Sponsored Content Comments Off on The Common Application Field Of Metal Laser Cutting
As a precision processing method, laser cutting can cut almost all materials, including two-dimensional or three-dimensional cutting of thin metal plates. So, what are the common application areas of ...
2021-12-06 Sponsored Content Comments Off on Aluminum alloy smelting method and process flow
The smelting methods used in the domestic aluminum industry generally include batch smelting and semi-continuous smelting. The batch smelting method refers to a smelting method that takes one smelting...
2021-12-06 Sponsored Content Comments Off on Process flow for surface spraying of aluminum panel components
The spraying operation has high production efficiency and is suitable for manual operation and industrial automation production. It has a wide range of applications, mainly in the fields of hardware, ...
2021-12-06 Sponsored Content Comments Off on Die casting porosity analysis and solutions
With the rapid development of the automobile industry and the demand for lightweight automobiles, the die-casting parts of aluminum, magnesium and other alloys have increased significantly, providing ...
2021-12-06 Sponsored Content Comments Off on The Cold And Heat Treatment In Magnesium-Aluminum Alloy Machining
In the process of machining magnesium-aluminum alloy materials, the operator must select appropriate equipment for finishing the magnesium-aluminum alloy materials. In the process of machining the mag...
