Home » Material Guide » Which machines are used for hardware parts processing?

Which machines are used for hardware parts processing?

Posted by: Alan Xia 2021-10-23 Comments Off on Which machines are used for hardware parts processing?

There are more and more hardware parts processing. In many machinery, many processing manufacturers can apply it, similar to cranes, or forklifts, or cranes, or some golden locks in life, keys, These parts for locomotive maintenance can all be applied. This is one point. Now the hardware processing specifications and processing materials are different, and the processing dimensions are also different according to the needs of customers. Let's take a look at the processing of hardware parts together!
  1. When designing the structure and shape of the parts of the metal stamping parts, the appearance and combination of complex and reasonable structure should be adopted, and at the same time, the number of processing surfaces and the processing area should be minimized as much as possible.
  2. Choose the method of blank preparation in reasonable machine manufacturing, which can indirectly apply profile, casting, forging, stamping and welding. The selection of the blank is related to the detailed production technical conditions, and generally depends on the production batch, data function and processing capability.
3. The requirements of metal stamping forming function. In order to facilitate the improvement of stamping deformation and product quality, the material should have good plasticity, large plate thickness and directivity coefficient, three-dimensional plate, and small ratio of strength to elastic modulus. . The separation process does not require materials with great plasticity, but materials with a certain degree of plasticity. 
4. The manufacturing precision and surface roughness with proper rules. The cost of metal stamping parts will increase with the improvement of accuracy, especially in the case of higher accuracy, this increase is extremely obvious. Therefore, high accuracy should not be pursued when there is no sufficient basis. In the same way, the surface roughness of metal stamping parts should also be based on the practical requirements of the appearance to make appropriate rules. Which machines are used for hardware parts processing?
Previous: What are the requirements for precision parts processing?Next: Surface treatment process of precision parts

Link to this article:Which machines are used for hardware parts processing?

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^