Home » Material Guide » the driver phase light is normal, why the size of the CNC machined part is larger and smaller ?

the driver phase light is normal, why the size of the CNC machined part is larger and smaller ?

Posted by: die casting 2021-10-14 Comments Off on the driver phase light is normal, why the size of the CNC machined part is larger and smaller ?

Cause of issue:  ① The long-term high-speed operation of the machine tool carriage causes wear of the screw and bearing② The repeated positioning accuracy of the tool holder will cause deviation in long-term use③ The carriage can accurately return to the starting point of processing every time, but the size of the workpiece is still changing.
This phenomenon is generally caused by the spindle. The high-speed rotation of the spindle causes serious bearing wear and changes in the machining dimensions. Solution (compared with the above)  1. Use a dial indicator to lean against the bottom of the tool holder, and at the same time edit a fixed cycle program through the system, check the repeat positioning accuracy of the carriage, adjust the screw clearance, and replace the bearing2. Use a dial indicator to check the repeat positioning accuracy of the tool post, adjust the machine or replace the tool post3. Use a dial indicator to check whether the workpiece can be accurately returned to the starting point of the program after processing the workpiece;If possible, repair the spindle and replace the bearing
For more details, welcome to check our website: www.ptjmachining.comPrevious: Anti-collision measures during operation of CNC machinesNext: Working Principle of CNC Lathe Triggered Measurement System

Link to this article:the driver phase light is normal, why the size of the CNC machined part is larger and smaller ?

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^