Home » Material Guide » CNC machining center failure analysis

CNC machining center failure analysis

Posted by: chinaeye 2021-07-12 Comments Off on CNC machining center failure analysis

cnc machining will encounter some problems in daily use. In our normal use of CNC machining, not only should we pay attention to maintenance, but also need to pay attention to the operation of CNC machining in operation. Do not blindly operate, below We mainly listed some faults in the daily use of CNC machining and some simple analysis of CNC machining failures.
    CNC machining encoder pulse count error alarm problem
    This kind of problem is usually displayed on the LED display screen 6. The PMM screen shows the 303/304/305/308 alarm in the system screen. The main fault is that the serial encoder of the servo motor does not calculate the number or the pulse is lost during operation. This kind of phenomenon needs to be turned on after the shutdown, and the alarm will disappear. If there is still an alarm, the motor or feedback cable should be replaced immediately. However, if the alarm sound disappears, it is not too happy. We need to return to the CNC machining center. After the reference point, run other commands for debugging. The weak PMM308 alarm may be caused by interference, and the shutdown can be started again.
    CNC machining center serial encoder communication error alarm
    For this kind of problem, we should first check the accuracy of the encoder amplifier and the feedback line of the CNC machined CNC motor and whether there is disconnection. If the shielding of the motor feedback line is not intact, please go to the manufacturer warranty as soon as possible, usually at The encoder and motor of the motor in CNC machining are integrated, it is best not to open it.
Lemo has over 40 CNC machining centers, include 3 axis,4 axis , 5 axis.We are expert on Custom metal parts, CNC machined parts, precision machining, aluminum machining, CNC machining ,CNC milling, CNC turning processing, precision grinding and so on. 
 pls conttact us as below :Amy ChenDongguan Lemo Precision Metal Products Co.,LtdDirect Phone: 86-137 1326 2409
Skype: amyptjEmail: [email protected]: www.ptjmachining.com
Previous: What is a real CNC machining expert?Next: How to use CNC machining center tools

Link to this article:CNC machining center failure analysis

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^